3 Series E46 316i (M43TU) SAL
51 48 ...
Removing and installing/replacing sound
insulation in front door, left or right
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove front door trim
•
If necessary, remove airbag module in front door
Using special tool 00 9 317 , lever out sealing bead (1) of
sound insulation (2) completely or if necessary partially.
Note:
Work with particular care in area (A) otherwise sound
insulation (2) will tear and must be replaced (leakage).
Important!
In case of replacement or partial detachments, lay 6 mm dia.
butylene tape (sourcing reference: BMW Parts Service)
depending on the conditions on inner door panel or sound
insulation.
Seal cable penetrations with butylene tape.
Sound insulation must be bonded completely (i.e. without
interruption) with butylene tape, otherwise moisture will get
into the passenger compartment (leakage).
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
19.01.2013 15:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
