3 Series E46 316i (M43TU) SAL
Carefully unclip door trim panel (1) at top with special tool
00 9 317 (trim panel wedge).
Feed door trim panel (1) out of unlocking knob (2).
Unhook Bowden cable for release lever:
- Tighten unlocking lever (1)
- Lift out lock (2)
- Remove Bowden cable (3) towards rear/top.
Installation:
Press unlocking lever (1) for installation fully on door trim panel.
Version with power windows:
If necessary, feed out lead (1) from door trim panel (2).
Version with additional speaker:
If necessary, disconnect plug connection (3) on additional speaker
(4).
Remove door trim panel (2).
Installation:
Clips (1) and (2) are longer than the other clips.
Clips (1) and (2) are gray,
the other clips are white.
Fit all clips with sealing ring.
If necessary, replace faulty clips.
RA Removing and installing rear left or right door trim panel
BMW AG - TIS
19.01.2013 15:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
