3 Series E46 316i (M43TU) SAL
Important!
In case of replacement or partial detachments, lay 6 mm dia.
butylene tape (sourcing reference: BMW Parts Service)
depending on the conditions on inner door panel or sound
insulation.
Seal cable penetrations with butylene tape.
Sound insulation must be bonded completely (i.e. without
interruption) with butylene tape, otherwise moisture will get
into the passenger compartment (leakage).
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on inner door panel is identified by
centre punch marks (2).
Note:
Position of butylene tape (1) on sound insulation (2).
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
19.01.2013 15:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
