3 Series E46 316i (M43TU) SAL
52 13 070
Removing and installing/replacing seat angle
adjuster (normal/manual) on left or right front
seat
Special tools required:
•
51 2 100
Necessary preliminary tasks:
•
Remove front seat
•
Remove actuating unit
Warning!
Torsion bar spring (1) is subject to tension. Risk of injury.
Lever torsion bar spring (1) with special tool 51 2 100 in
direction of arrow from seat angle adjuster.
Feed torsion bar spring (1) out of seat mechanism.
Installation:
Make sure plastic protector is correctly positioned on contact
surface between torsion bar spring and seat mechanism (grating
noises).
RA Removing and installing/replacing seat angle adjuster (normal/manual) on left or
BMW AG - TIS
19.01.2013 15:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
