3 Series E46 316i (M43TU) SAL
Enabling seat occupancy detector (OC3 mat):
•
Connect BMW diagnosis system
•
Release seat occupancy detector
•
Clear fault memory if necessary
Seat with electric actuating unit only:
Release screws (1).
Pull trim (2) out a little and release screw (3).
Release clip (5) from carrier (4).
Remove trim (2) and carrier (4).
Installation:
Cable holders (1) on carrier (2) must not be damaged.
E46 only:
Pull out tongue (1) on seat cover (2) on left/right.
RA Replacing seat cover on left or right front seat (normal/manual)
BMW AG - TIS
19.01.2013 15:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
