3 Series E46 316i (M43TU) SAL
Installation:
The support is coated with wax to prevent grinding noises.
Do not remove wax (1) on support (2).
Passenger seat only (replacing padding):
Installation:
In order to guarantee the function and fastening (adhesive
strength) at the sticking surfaces of sensor mat (1), the foam
most not show any traces of damage at all!
Replace the foam if it is hardened or damaged particularly in the
area of the sticking surfaces.
Fit new sensor mat (1) for passenger seat occupancy detector.
Align new sensor mat (1) on foam (2).
Feed plug (3) through bore hole (4).
Passenger seat only (replacing sensor mat):
Passenger seat only (replacing padding):
Installation:
Detach liner (1) at individual points and stick sensor mat (2)
onto foam (3).
Note:
The work for "Replacing support" ends here.
RA Replacing seat cover on left or right front seat (normal/manual)
BMW AG - TIS
19.01.2013 15:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
