3 Series E46 316i (M43TU) SAL
52 13 ...
Removing and installing/replacing seat pan
and flexmat (normal/manual), left or right
Remove seat cover with support,
refer to 52 13 400.
Release left screw (1) and slacken right screw only.
Release left/right screws (3).
Slacken left/right screws (4) only.
Remove left retaining plate (2) downwards.
Installation:
Tightening torque,
refer to Technical Data 52 10 9AZ.
Press seat pan (1) upwards, thereby relieving tension on flexmat.
Release screws (1) and remove retaining plates (2).
Installation:
Tightening torque,
refer to Technical Data 52 10 9AZ.
RA Removing and installing/replacing seat pan and flexmat (normal/manual), left or
BMW AG - TIS
19.01.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
