bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing _ Replacing Controls On Left _ Right Front Seat (normal > < 3 RA Removing And Installing Left Or Right Front Seat (normal_manual)
Page 2
background image

Unclip cover at front.

Release nuts (3) at front.

Installation:

Replace nuts.

Move front seat down and seat runners forward so that they are
flush.

Unlock lock (1) and disconnect plug connection (2).

Important!

Cover door sill with protective covers (risk of damage).

Lift out front seat.

Installation:

Carpet must not get between seat rails and floor pan in area
of fastening points (grating noises).

Tightening torque 52 10 1AZ.

RA  Removing and installing left or right front seat (normal/manual)

BMW AG - TIS

19.01.2013  15:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing _ Replacing Controls On Left _ Right Front Seat (normal > < 3 RA Removing And Installing Left Or Right Front Seat (normal_manual)