3 Series E46 316i (M43TU) SAL
Removing and installing actuating unit:
Remove front seat,
refer to 52 13 000.
Remove outer cover on front seat,
refer to 52 13 040.
Move front seat to basic position:
Caution!
One seat runner is spring-loaded, risk of injury when
unlocking.
Operate actuating lever (1) and snap seat runners (2) into
position by sliding.
Operate actuating lever (3) and snap seat cushion (4) into
position by loading.
Operate actuating lever (5) and snap seat backrest (6) into
position by moving.
Lever out rear trim (1), unclip clips (2) and remove trim (1).
Installation:
Catch (1) and clips (2) on trim (3) must not be damaged;
replace if necessary.
RA Removing and installing / replacing controls on left / right front seat (normal
BMW AG - TIS
19.01.2013 15:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
