3 Series E46 316i (M43TU) SAL
Lift actuating lever (1) and release screw (2).
Release screws (3) and (4) and detach actuating unit (5).
Installation:
Screw (3) is shorter than the others.
Insert screw (3) for assembly into actuating unit (5).
Tightening torque,
refer to Technical Data 52 10 7AZ .
Installation:
Front guide (1) and eccentric disks (2) on actuating unit (3)
must not be damaged.
Replacement of actuating unit version (C) (spare part) only:
Installation:
For adjustment, coat threads (1) with acid-free grease.
The eccentric disks (2) and (4) are carried upwards for
adjustment by the grease.
1.
Threads for eccentric disks
2.
Eccentric disk for backrest adjustment
3.
Actuating lever for backrest adjustment
4.
Eccentric disk for seat height adjustment
5.
Actuating lever for seat height adjustment
Adjusting actuating unit, actuating unit version (C) (spare part)
only:
Adjusting seat height and backrest inclination:
-
The screw heads of threads (2) must remain clipped in place
-
Unscrew eccentric disk (1)
-
Apply acid-free grease to threads (2)
-
Screw on eccentric disk (1)
-
Turn eccentric disk (1) to zero position:
straight surface (3) of eccentric disk (1) must be at top.
RA Removing and installing / replacing controls on left / right front seat (normal
BMW AG - TIS
19.01.2013 15:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
