3 Series E46 316i (M43TU) SAL
Installation:
Slide backrest cover (1) on left/right over clip mount (2).
Installation:
Mounts (1) on backrest frame (2) must not be damaged.
To install rear panel, first slide into mounts (1) and then slide
in at sides at bottom,
refer to next work step.
Installation:
After installing rear panel in upper mounts,
refer to previous work step:
Feed rear panel at sides into opening in backrest cover and
insert into mounts (1) on left/right on backrest frame (2) and
snap into place.
RA Removing and installing/replacing rear panel on front left or right seat backres
BMW AG - TIS
19.01.2013 15:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
