bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
10 RA Removing And Installing_replacing Thigh Support Holder On Front Left Or Right Se > < 9 RA Removing And Installing_replacing Seat Angle Adjuster (sport_manual) On Left Or

3 Series E46 316i (M43TU) SAL

Page 2
background image

Release screws (1).

Installation:

Replace Taptite screws (1).

Tightening torque 52 10 16AZ

.

Release screw (2).

Remove seat angle adjuster (3).

Installation:

Slide left and right O-rings onto shaft. Make sure O-rings are
correctly located between seat angle adjuster and seat pan.

RA  Removing and installing/replacing seat angle adjuster (sport/manual) on left or

BMW AG - TIS

19.01.2013  15:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

10 RA Removing And Installing_replacing Thigh Support Holder On Front Left Or Right Se > < 9 RA Removing And Installing_replacing Seat Angle Adjuster (sport_manual) On Left Or