3 Series E46 316i (M43TU) SAL
Note:
The operation "Removing cushion for thigh support" ends
here.
Removal of "Thigh support holder" only:
Unhook spring (1) at bottom from holder (2) and seat frame (3).
Release screws (1).
Press operating lever (2) fully and detach holder (3) for thigh
support towards front from seat frame (4).
Installation:
Following parts on holder (5) must not be damaged:
1
Mounts for trim wire
2
Holding-down elements for trim wire
3
Guide sleeves
4
Double-sided adhesive tape (replace or coat with spray
adhesive for assembly)
RA Removing and installing/replacing thigh support holder on front left or right se
BMW AG - TIS
19.01.2013 15:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
