3 Series E46 316i (M43TU) SAL
Release screws (1).
Pull trim (2) out a little and release screw (3).
Release clip (5) from carrier (4).
Remove trim (2) and carrier (4).
Installation:
Cable holders (1) on carrier (2) must not be damaged.
Installation:
Clips (1) on sports seat trim (2) must not be damaged.
Note:
The operation "Removing holder for actuation" ends here.
RA Replacing seat cover for left or right front seat (sports/electric)
BMW AG - TIS
19.01.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
