3 Series E46 316i (M43TU) SAL
Version with seat heating:
Installation:
Note routing of seat heater cable (1).
Do not damage with clips.
Version with OC3 mat:
-
OC3 mat must not be kinked under any circumstances.
Detach all retainers in side area from longitudinal wires (1).
Pull trim wires (1) forward out of seat cover.
Carefully fold back seat cover and release retainers from cross-
wires (2).
Remove seat cover from padding.
Important!
Remove all remnants of clips from seat cover and padding.
Remove padding (1) from seat cover (2).
Version with seat heating:
Installation:
If necessary, detach heating mat (1) from adhesive tape (2) of
thigh support.
3
Seat heater cable
RA Replacing seat cover for left or right front seat (sports/electric)
BMW AG - TIS
19.01.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
