3 Series E46 316i (M43TU) SAL
Installation:
Support (2) must be coated with wax (1) to prevent grinding
noises.
Do not remove wax (1) on support (2).
Passenger seat only (replacing sensor mat):
Installation:
In order to guarantee the function and fastening (adhesive
strength) at the sticking surfaces of sensor mat (1), the foam
most not show any traces of damage at all!
Replace the foam if it is hardened or damaged particularly in the
area of the sticking surfaces.
Lay sensor mat connection without creasing into groove on
support.
Fit new sensor mat (1) for passenger seat occupancy detector.
Align new sensor mat (1) on foam (2).
Feed plug (3) through bore hole (4).
Installation:
Detach liner (1) at individual points and stick sensor mat (2) onto
foam (3).
Note:
The operation "Replacing support or sensor mat" ends here.
RA Replacing seat cover for left or right front seat (sports/electric)
BMW AG - TIS
19.01.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
