3 Series E46 316i (M43TU) SAL
Note:
For purposes of clarity, shown here without valve housing.
Installation:
Observe cable guide (1) for backrest heating.
Lay air hoses (2) without kinks through hole (3).
Version with lumbar support and backrest width adjustment only:
Detach hoses (1) and (2) at cutting line (heat with hot air blower if
necessary).
1
Hose (blue) upper cushion (lumbar support)
2
Hose (red) lower cushion (lumbar support)
3
Hose (white) right cushion (backrest width adjustment)
4
Hose (white) left cushion (backrest width adjustment)
5
Motor pump unit
Detach backrest cover (1) at sides towards front and remove with
support upwards from backrest frame (2).
Note:
The work for "Removing backrest cover with padding" ends
here.
RA Replacing backrest cover on front left or right seat (sports/electric)
BMW AG - TIS
19.01.2013 15:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
