Outer Cover Removal and Installation - BMW E46 316i (M43TU) SAL
Lever lugs (1) on cover (3) out of brackets (2).
Lever out cover (1) at rear, detach at front from guide and remove.
Installation:
Do not crush cables (1) during installation.
Insert lugs (2) into mounts (3) and snap into place.
Disconnect plug connection (1).
Lever out lugs (2) and detach switch combination (3).
RA Removing and installing/replacing outer cover on front left or right seat (sport
BMW AG - TIS
19.01.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
