3 Series E46 316i (M43TU) SAL
52 26 301
Removing and installing / replacing actuating
mechanism for left rear seat backrest
(through-loading system)
Remove and install lock for rear seat backrest (through-
loading system),
refer to 52 26 309.
For saloon/sedan only:
Loosen screws (1).
Unlock catch (2) and at same time unclip mechanism (3)
towards bottom.
Unclip Bowden cable from mounting (4).
Installation:
Catches (1) of mechanism (3) must not be damaged.
Bowden cable (2) must be engaged correctly in mechanism (3).
For Coupé only:
Loosen screws (1).
Unlock catch (2) to middle of car and at same time unclip
mechanism (3) towards bottom.
Unclip Bowden cable from mounting (4).
RA Removing and installing / replacing actuating mechanism for left rear seat backr
BMW AG - TIS
19.01.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
