3 Series E46 316i (M43TU) SAL
52 26 309
Removing and installing/replacing lock for
rear seat backrest (through-loading system),
left
Unlock rear seat backrest and fold down.
Unclip Bowden cable from mounting (1).
Unfasten screws (2).
Note:
If rear seat backrest cannot be unlocked, release screws (2)
and feed lock out of installation opening with backrest.
Pull lock (1) out of installation opening a little and unclip Bowden
cable (2).
Remove lock completely from installation opening.
Installation:
Catches (2) on lock must not be damaged.
Bowden cable must be anchored correctly in catches (2).
Installation:
Slide guide lug (1) of lock into opening (2).
RA Removing and installing/replacing lock for rear seat backrest (through-loading s
BMW AG - TIS
19.01.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
