3 Series E46 316i (M43TU) SAL
52 26 400
Replacing seat cover for rear seat (through-
loading system)
Remove rear seat,
refer to 52 26 005.
Feed tightening strap (1) out of wire (2).
Note position of clips.
Cut through or bend open all clips.
If possible, feed cover out of wire loop.
Carefully pull off cover and in so doing cut through or bend open
clips of trim wires.
Remove all remnants of clips from cover and support.
Installation:
Lock new clips by bending with special tool 52 0 050. If
necessary, surround existing wire in foam seat with clips.
If possible, feed trim wires into new cover.
RA Replacing seat cover for rear seat (through-loading system)
BMW AG - TIS
19.01.2013 15:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
