3 Series E46 316i (M43TU) SAL
Press headliner (1) to right against springs and at same time
detach sliding member (2) from guide duct (3) and
headliner (1).
Installation:
Rear sliding member (1) must be fitted behind driver (2).
Pull headliner (1) to left/upwards with sliding members (2) out of
rail (3).
Pull sliding member (1) at front/rear off springs (2) of
headliner (3).
RA Removing and installing/replacing headliner for glass slide/tilt sunroof lid
BMW AG - TIS
19.01.2013 15:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
