3 Series E46 316i (M43TU) SAL
61 31 295
Replacing clutch switch for cruise control
system
Remove trim panel for pedal assembly.
Press clutch pedal with pedal support down to flow and lock in
position.
Disconnect plug connection (1).
Withdraw sleeve (3) in direction of arrow up to stop.
Press both retaining clips together at front end and pull out
switch (2) in direction of arrow towards rear.
Installation:
Slowly move clutch pedal to initial position.
RA Replacing clutch switch for cruise control system
BMW AG - TIS
19.01.2013 16:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
