3 Series E46 316i (M43TU) SAL
Checking with angulometer:
Remove wiper blades.
Insert windscreen wiper arm (1) in angulometer 61 6 100 .
Using screw (2) and pressure plate (3), locate windscreen wiper
arm (1) and position on windscreen.
Read off value in degrees, adjust wiper arm if necessary.
Note:
Windscreen wiper arm (1) must rest correctly on lower and
side contact surfaces (4) of angulometer 61 6 100 .
On right-hand-drive cars, screw (2) must be located on left
side of special tool 61 6 100.
Press special tools 00 9 220 in appropriate direction until
correct contact/approach angle is obtained.
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
19.01.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
