3 Series E46 316i (M43TU) SAL
61 67 040
Adjusting spray nozzles for headlight
cleaning system
Special tools required:
•
00 9 100
•
64 1 020
Low-beam headlamp:
The spray contact point must be located in the center of the low-
beam headlamp.
To adjust, slowly pull out spray nozzle fully with aid of special
tool 64 1 020 and adjust spray contact point with special tool
00 9 100 .
High-beam headlamp:
The spray contact point must be located in the center of the high-
beam headlamp.
To adjust, slowly pull out spray nozzle fully with aid of special
tool 64 1 020 and adjust spray contact point with special tool
00 9 100 .
Note:
After checking the contact points, turn ignition off and on again
before repeating the spray procedure. The function of the
headlight cleaning system is otherwise disabled for approx. 3
minutes. Refer to function description in Diagnosis and
Information System.
RA Adjusting spray nozzles for headlight cleaning system
BMW AG - TIS
19.01.2013 16:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
