bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Left Or Right Tail Light (on Rear Lid) > < 1 RA Replacing A Socket Housing For Left Or Right Rear Light (saloon_sedan, Touring)|Page 2871
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (in side panel)

Remove socket housing for rear light.

Saloon/Sedan, Coupé and Convertible:

Detach luggage compartment wheel arch liner in rear area.

Release nuts and remove rear light towards outside.

Coupé and convertible only:

Replacement:

Convert side trim on rear light (inside).

touring:

Unscrew nut (1).

Release nuts (2) slightly and remove rear light (3) towards
outside.

All:

Installation:

Make sure rear light seal is correctly seated, replace if necessary.

Make sure there is a uniform gap all round between outer rear
light and side panel.

RA  Removing and installing/replacing left or right rear light (in side panel)

BMW AG - TIS

19.01.2013  16:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Left Or Right Tail Light (on Rear Lid) > < 1 RA Replacing A Socket Housing For Left Or Right Rear Light (saloon_sedan, Touring)|Page 2871