3 Series E46 316i (M43TU) SAL
All others:
Unfasten plug connection and disconnect.
Turn retaining ring in direction of arrow and remove bulb holder
towards rear.
Note:
If retaining ring is tightly seated, press bulb holder forwards.
Remove bulb from bulb holder.
Installation:
•
Make sure bulb holder is correctly seated on headlight by
correctly engaging retaining ring
All models:
Installation:
•
Note bulb type
RA Replacing halogen bulb for high-beam headlight on left
BMW AG - TIS
19.01.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
