3 Series E46 316i (M43TU) SAL
64 11 271
Replacing water valve for heater
M43TU, M52TU, M54, S54, N42 only:
Remove intake filter housing.
M47 only:
Remove acoustic cover at front with intake snorkel.
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
M47TU only:
Disconnect plug connections (1).
Release hose clamps (2) and detach water hoses.
Lift out water valve for heater (3).
Installation:
If necessary, replace rubber mount.
All except M47TU:
Water valve for heater with auxiliary water pump:
Disconnect plug connections (1).
Release hose clamps (2) and detach water hoses.
Lift out water valve for heater (3).
Installation:
If necessary, replace rubber mount.
RA Replacing water valve for heater
BMW AG - TIS
19.01.2013 16:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
