3 Series E46 316i (M43TU) SAL
Installation:
Tightening torque 64 53 10AZ
.
Release screws.
Detach refrigerant lines in direction of arrow.
Installation:
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 2AZ
.
If necessary, pull lock (1) in direction of arrow and feed out
flap (2).
Slacken nut (1).
Installation:
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 11AZ
.
Detach double pipe (2) in direction of arrow and lay to one side.
Release screws.
Installation:
Replace sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 9AZ
.
Pull out expansion valve in direction of arrow.
RA Removing and installing or replacing expansion valve
BMW AG - TIS
19.01.2013 16:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
