3 Series E46 316i (M43TU) SAL
65 52 020
Replacing trim panel for on-board monitor
(control panel)
Remove and install complete on-board monitor,
refer to 65 52 010.
Caution!
Place trim panel on special tool 12 7 192 (anti-static mat)
and ground.
Release screws (1) and tilt trim panel out from above.
Release screws (1) and remove LC display.
RA Replacing trim panel for on-board monitor (control panel)
BMW AG - TIS
19.01.2013 17:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
