3 Series E46 316i (M43TU) SAL
67 66 013
Removing and installing / replacing drive unit
for lumbar support on left or right front seat
(sports seat)
Remove rear panel on front seat backrest.
Detach backrest cover (1) from backrest frame (2).
Disconnect plug connection (1).
Detach transparent hose (2) from valve housing (3).
Note:
If necessary, gently heat transparent hose (2) if firmly seated.
If necessary, detach fabric adhesive tape (4).
Detach drive unit for lumbar support (5) with jacket towards rear.
Installation:
Clean adhesive area (1) on backrest frame (2).
RA Removing and installing / replacing drive unit for lumbar support on left or rig
BMW AG - TIS
19.01.2013 17:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
