3 Series E46 316i (M43TU) SAL
Slacken nut (1).
Remove gas generator, ITS head airbag (2).
Installation:
Replace self-locking nut (1).
Tightening torque,
refer to Technical Data 72 12 6AZ
Installation:
Lug (1) of ITS head airbag gas generator must be fixed in
position in bore (2) in support tube (3)!
Note:
Gas generator version as of 07 / 98
The gas generator, ITS head airbag, will be altered from 07 / 98.
The altered ITS head airbag gas generator has as its upper
attachment point a bore (1) for attachment to the instrument panel
support tube.
Lower mounting point (2) is designed as a pin for securing in
support tube for instrument panel.
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
19.01.2013 17:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
