3 Series E46 316i (M43TU) SAL
72 14 ...
Replacing outer/inner Isofix holders
Arrangement of holders for Isofix:
1
Outer Isofix holder
2
Inner Isofix holder
Remove cover of holders.
Release screw (1).
Installation:
Tightening torque = 31 Nm.
Installation:
Push on catches (2) of cover (1) over pin (3).
RA Replacing outer/inner Isofix holders
BMW AG - TIS
19.01.2013 17:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -