bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Hands-free Microphone|Page 3209 > < 5 RA Removing And Installing _ Replacing Interface For D-Network Car Phone
Page 1
background image

84 11 550

Removing and installing/replacing hands-free
microphone

Special tools required:

64 1 020

Important!

Disconnecting the plug connection for the hands-free
microphone or emergency SOS call button results in fault
memory entries in the telephone control unit (limitation in the
emergency SOS call system).

After fitting, read out fault memory and if necessary delete
entries.

Model without slide/tilt sunroof:

Lever out microphone trim (1) with special tool 

64 1 020  in

direction of arrow and remove.

Disconnect plug connection underneath.

Replacement:

Unclip hands-free microphone (1) and remove from microphone
trim (2).

Installation:

Arrow (3) of hands-free microphone (1) and arrow (4) of
microphone trim (2) point in driving direction.

RA  Removing and installing/replacing hands-free microphone

BMW AG - TIS

19.01.2013  17:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Hands-free Microphone|Page 3209 > < 5 RA Removing And Installing _ Replacing Interface For D-Network Car Phone