3 Series E46 316i (M43TU) SAL
11 27 Balancing Shaft
Type
Thread
Tightening specification
Measure
1AZ Balancing shaft housing on engine
block
M43TU
Replace, wash and oil
screws
Jointing torque
20 Nm
Torque angle
90
°
N40 / N42 /
N46
M8 10.9
Replace screws.
Wash and oil screws
Jointing torque
25 Nm
Torque angle
90
°
2AZ Balancer shaft housing lower section
to upper section
M43TU
Replace, wash and oil
screws
Jointing torque
22 Nm
Torque angle
100
°
AZD Balancing Shaft
BMW AG - TIS
19.01.2013 19:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
