3 Series E46 316i (M43TU) SAL
If the ZV does not send a return signal, initialization must be restarted.
Once the first initialization process has been completed, another three radio transmitters can be initialized.
For every other radio transmitter, the procedure described under 4. above must be repeated within 30 seconds,
otherwise initialization stand-by is switched off.
During initialization, all other existing radio transmitters must be initialized. The ignition lock must never be reactivated
during the initialization process. If this were to happen, then all radio transmitters would have to be re-initialized.
8 Diagnosis
The radio remote control can be diagnosed via DIS and MoDiC under
"Central body electrics - ZKE".
9 System interconnections
Various functions in the central body electrics, the anti-theft alarm system (DWA) and the electronic immobiliser
(EWS) can be activated or deactivated by means of the radio transmitters. During vehicle diagnosis, it is important to
know how the radio transmitter influences the total system.
System interconnections using the E46 as an example
Graphics
Designation
Z
Ignition lock, electromechanical part
SBT New radio remote control all models beginning 09/99
BMW AG - TIS
19.01.2013 21:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
