bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 IDC Car & Key Memory Functions For Series E38, E39 (from 09_98), E46, E52, E53, R50,|Page 4606 > < 1 IDC Car & Key Memory Functions For Series E38, E39 (from 09_98), E46, E52, E53, R50,|Page 4604
Page 11
background image

o

not active

The vehicle is automatically locked when it pulls away. It is
still possible to open it from the inside. This function is
effective when the doors are opened using the remote
control. 
For the setting to be effective using a key at the lock,
please refer to 1.2 Car Memory - Central locking system.

Radio unlocking

o

rear window

o

rear lid

Open the rear lid or rear window with remote control by
pressing the button on the key. 
E46 Touring

Selective central locking system

o

active

o

not active

The first time the button on the key is pressed, only the
driver's door is unlocked. If it is pressed a second time,
the whole car is opened. This function is only effective
when the remote control is used. 
For the setting to be effective using a key at the lock,
please refer to 1.2 Car Memory - Central locking system. 
E38, E39, E46, E53 - not E52, R50, R52, R53

Easy Entry 

o

active

o

not active

The Easy Entry facility can be set to active or not active. 
This setting is effective when the vehicle is unlocked
with the remote control. 
 
For the setting to be effective using a key at the lock, see
section 1.2 Key Memory - Central locking system. 
Only E46 Coupé with general module up to software
version SW1.4

Easy Entry / selective 
central locking

o

Easy Entry

o

Selective central locking

o

not active

Easy Entry or selective central locking can be selected.
Similarly, both functions can be deactivated. This setting
is effective when the vehicle is unlocked with the remote
control.
 
For the setting to be effective using a key at the lock, see
section 1.2 Car Memory - Central locking system.
Only E46 Coupé

Please note:

The selection of the setting "Easy Entry" is only
possible for the E46 Coupé with basic module
software version SW1.5 or higher.

2.2 Key Memory - Heating / air conditioning / ventilation

Blower
Setting blower speed

o

higher

o

normal

o

lower

In automatic operation, the normal blower output can be
increased or decreased.
E46 - not E38, E39, E52, E53, R50, R52, R53

Blower 
Air conditioning auto mode

o

active

o

not active

When this function is active, air-conditioning automatic
mode is started when the ignition is switched on. 
E46 only

Vent flaps 

IDC  Car & Key Memory functions for series E38, E39 (from 09/98), E46, E52, E53, R50,

BMW AG - TIS

19.01.2013  21:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 11 -

1 IDC Car & Key Memory Functions For Series E38, E39 (from 09_98), E46, E52, E53, R50,|Page 4606 > < 1 IDC Car & Key Memory Functions For Series E38, E39 (from 09_98), E46, E52, E53, R50,|Page 4604