3 Series E46 316i (M43TU) SAL
VK-21, Pelz
Register/Index: 5
5 03 98 (292)
Vertrieb D
KDL d. VG's u.
Imp. z. Info
04/1998
Straightening angle sets
E46
Situation:
A new straightening angle set is required for professional body repairs.
A difference must be made between straightening sets manufactured by CELETTE and by
CARBENCH.
With these straightening angle sets, the front supports for the "wheel arch support carrier"
and "side panel retainer connection" (CELETTE parts 5-8, CARBENCH parts 70) are
included.
Please refer to Enclosure 1.
The straightening angle sets will become available with the launch of the E46.
Moreover, the new measuring and straightening system manufactured by CAR-O-LINER
can be used for body repairs. This is the subject of a separate Service Information bulletin.
Please refer to Service Information bulletin 5 02 98 (291)
Procedure:
Both straightening sets are in stock as store tools and will only be delivered to order.
SWS Straightening angle sets E46
BMW AG - TIS
19.01.2013 22:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
