3 Series E46 316i (N42) SAL
Important!
Only release the 8 nuts shown in the illustration.
Clamp special tool 11 9 320 as illustrated in a vise.
Important!
Do not tilt bearing bracket (1).
Carefully lift out bearing bracket (1).
Deposit bearing bracket with inlet camshaft upwards in special
tool 11 9 320 .
RA Removing and installing/replacing intermediate levers (N42/N46)
BMW AG - TIS
20.01.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
