3 Series E46 316i (N42) SAL
Important!
Rocker arms (1) slip slightly when bearing bracket is fitted.
Make sure rocker arms (1) are secured as illustrated on
hydraulic valve clearance compensating elements and on
valves.
Align rocker arms (1) straight.
Important!
Do not tilt bearing bracket (1).
Lower bearing bracket (1) from above and carefully bring into
contact with cylinder head.
Insert 8 nuts and install without play.
Insert 4 nuts on bearing bracket at front and install without play.
RA Removing and installing/replacing intermediate levers (N42/N46)
BMW AG - TIS
20.01.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
