3 Series E46 316i (N42) SAL
Note:
Gap between eccentric shaft and timing chain is very narrow.
Do not tilt eccentric shaft sensor (1) during removal and
installation.
Slight scratches on eccentric shaft sensor (1) are unavoidable.
Press timing chain forwards and remove eccentric shaft
sensor (1) towards top.
Assemble engine.
RA Removing and installing/replacing eccentric shaft sensor (N42/N46)
BMW AG - TIS
20.01.2013 19:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
