3 Series E46 316i (N42) SAL
11 51 000
Removing and installing/replacing water
pump (N40/N42/N45/N46)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
•
Remove alternator drive belt.
•
Remove coolant drain plug on radiator. Drain and dispose of
engine coolant.
Note:
Water pump with thermostat and power steering pump are bolted
to each other and can only be removed and installed as a single
unit.
Power steering pump remains in car.
RA Removing and installing/replacing water pump (N40/N42/N45/N46)
BMW AG - TIS
20.01.2013 19:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
