3 Series E46 316i (N42) SAL
12 14 550
Replacing control module (DME)
Follow instructions for removing and installing electronic control
units.
Before replacing the control module, always follow the instructions
listed below:
·
Code control unit.
·
Program control unit.
Caution!
It is absolutely essential to read out the fault memory with the
MoDiC or the BMW DIS and to create a fault memory printout.
Turn off ignition.
Release screws (1).
Remove cover.
RA Replacing control module (DME)
BMW AG - TIS
20.01.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -