3 Series E46 316i (N42) SAL
Installation:
Connect new rear muffler and center muffler by means of
clamping sleeves.
Locating face is in center of clamping sleeve.
Align exhaust system and clamping sleeves so that there is
sufficient distance to the adjoining components.
Installation:
Check the position of the tailpipe to the body-cutout.
Tighten down screws of clamping sleeves.
RA Removing and installing/replacing catalytic exhaust-gas converter (N40,N42,N45,N
BMW AG - TIS
20.01.2013 19:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -