3 Series E46 316i (N42) SAL
Stop screw with a flat head must be fitted.
Screw in stop screw (1) to measurement (A).
Measurement (A) = 10 mm.
-
Adjusting rear lid to fit at sides:
Unfasten screws (1 and 2) on left and right sides until trunk lid is
still just able to move.
Note:
If the adjusting range is not sufficient, release rear lid hinge
mounting bolts on body and adjust hinge on body.
Caution!
Before closing the trunk lid and when closing the trunk lid,
ensure that the body and/or trunk lid are not damaged.
Close trunk lid.
RA Adjusting trunk lid to fit
BMW AG - TIS
20.01.2013 22:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
