3 Series E46 316i (N42) SAL
Disconnect plug connection (1), release nut (2) and secure leads
to rear window with adhesive tape.
Raise trunk lid by about 65 cm and hold in this position (e.g. attach
welding wire with two hooks between lock and lockpin).
Remove seals (1).
Mask edges of trunk lid and all round body with fabric adhesive
tape (e.g. Tesa).
1.
Rear window
2.
Glue bead
3.
Body opening
4.
Fabric adhesive tape
RA Removing and installing rear window
BMW AG - TIS
20.01.2013 23:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -