3 Series E46 316i (N42) SAL
Release screws (1).
If necessary, release pin (2).
Remove insert (3) towards bottom.
Feed out wire (1) for glovebox light from guides (2).
Disconnect plug (1) and feed out cable (2) from guides.
Press panel (1) somewhat to rear and remove from guides (2).
Feed out clip (3) on panel (1) to front/right.
RA Removing and installing instrument panel trim
BMW AG - TIS
20.01.2013 23:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -