3 Series E46 316i (N42) SAL
51 71 447
Removing and installing or replacing panel
for cover on left or right side member
Note:
Grommets and clips must be softened in a water bath for
some time prior to installation.
Release expansion rivets (1) at bottom.
Unclip panel (1) from front to rear,
lever out catch (2) and slide panel (1) towards rear out of guide
clip (3).
Installation:
If necessary, fit new guide clip (1).
RA Removing and installing or replacing panel for cover on left or right side membe
BMW AG - TIS
20.01.2013 23:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -