3 Series E46 316i (N42) TOUR
41 00 ...
Safety at work
1.1 Working with aluminum dust:
-
Wear a fine dust mask.
-
E52 only: Use an explosion-proof extractor system (refer to Service Information 5 01 00 532).
-
Note national regulations.
1.2 Removing sealing materials
-
Hydrochloric acid is created when PVC sealing material is heated to temperatures in excess of 180
°
C.
-
Remove PVC sealing material with a rotating wire brush only or heat material with a hot air blower to max. 180
°
C
and remove with a spatula.
-
Ensure that all enclosed areas are well ventilated or are provided with direct extractor facilities.
1.3 Arc welding and brazing:
Important!
The extremely bright arc during welding may cause serious injury to the eyes if appropriate protective
measures are not taken.
-
Use a special welding screen* for the relevant welding process (MAG or MIG).
-
Partition off the work bays with beam protection screens*.
-
Use a welding-emissions extractor facility*.
-
The welder must wear protective clothing* and gloves* which are suitable for welding (i.e. flameproof).
-
A fire extinguisher must be located within reach of the welding area.
-
Do not carry out any welding work in the proximity of a fuel tank e.g. when it is installed.
-
Note national regulations.
*Sourcing reference: refer to Workshop Equipment Planning CD or Service Information 5 01 00 532
1.4 Working with adhesive products (adhesives, cleaning agents, primers etc.):
Important!
Handling adhesives can trigger off allergic skin and breathing reactions.
-
Do not eat, drink or smoke during this operation.
-
Avoid direct contact with eyes and skin.
-
Wear protective goggles, protective gloves and if necessary an apron.
-
Ensure that all enclosed areas are well ventilated or are provided with direct adhesive fume extractor facilities.
-
Work clothing which has been contaminated with adhesive or solvent must be changed immediately.
-
After finishing work, wash your hands and apply protective skin cream.
RA Safety at work
BMW AG - TIS
21.01.2013 17:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -