3 Series E46 316i (N42) TOUR
51 12 742
Replacing one shock absorber for rear
bumper (touring)
(bumper removed)
If necessary, remove rear bumper,
refer to 51 12 000.
Remove cover or parcel shelf in trunk,
refer to 51 47 ...
Release nuts (1) on inside and remove shock absorber.
Installation:
Tightening Torque 51 12 3AZ.
Installation:
If necessary, fit a new gasket (1) and a new cover (2) to shock
absorber (3).
Adjust bumper:
Ideal adjustment:
Distance (A) must be the same all around between the bumper
and body cutout.
Dimension (A) = 5
±
1 mm
RA Replacing one shock absorber for rear bumper (touring)
BMW AG - TIS
21.01.2013 18:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -